Kern-sohn FA 6T-3M Manual de usuario descargar pdf (Pagina 18)

18 KFB/KFN-TM-BA_IA-e-1220

6.9.2 Non verifiable weighing systems

Call up menu:

1. Switch-on balance and during the selftest press .

2. Press subsequently , , the first menu block

„PO CHK“ will be displayed.

3. Press repeatedly until „P3 CAL“ will be displayed.

4. Confirm with ; press repeatedly until „CAL“

appears.

5. Acknowledge using , the current setting is displayed.

 Press to confirm; press to select setting.

noLin = adjustment

LineAr = linearization, see chap. 6.10



How to carry out adjustment:

 Confirm menu setting „noLin“ by .

Ensure that there are no objects on the weighing plate.



 Wait for stability display, then press .

 The currently set adjustment weight will be displayed.

 To change by using the navigation buttons (see chap. 2.1.1)

select the desired setting, the active digit is flashing.

 Acknowledge with .

 Carefully place adjusting weight in the centre of the weighing

plate. Wait for stability display, then press .

 After the adjustment the balance will carry out a self-test.

Remove adjusting weight during selftest, balance will return

into weighing mode automatically. An adjusting error or

incorrect adjusting weight will be indicated by the error

message; repeat adjustment procedure.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 82 83

Sin comentarios

Kern-sohn FA 6T-3M Manual de usuario Pagina 18