Kern-sohn KFE-TM Manual de usuario descargar pdf (Pagina 14)

14 KFE-TM-BA_IA-e-1313

Procedure

 Confirm menu setting by .

Ensure that there are no objects on the weighing plate.

 Wait for stability display, then press .



 The currently set adjustment weight will be displayed.

 Either use the displayed adjustment weight or change it with

, and (numerical input see chapter 2.1.1), the

active digit is flashing.

 Confirm by , „LoAd“ will be shown.

 Carefully place adjusting weight in the centre of the weighing

plate. Wait for stability display, then press .

 After the adjustment the balance will carry out a self-test.

Remove adjusting weight during selftest, balance will return

into weighing mode automatically.

An adjusting error or incorrect adjusting weight will be

indicated by the error message; repeat adjustment

procedure.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 57 58

Sin comentarios

Kern-sohn KFE-TM Manual de usuario Pagina 14