Kern-sohn CXP Version 1.6 Manual de usuario descargar pdf (Pagina 27)

CXB/CXP-BA-e-1016

9.2 Numeric entering of the reference weight

If you know the reference weight/piece you can enter this via number keys.

Enter reference weight via number keys

PRE-

TARE

1.833

M+

Confirm with key

PRE-

TARE

1.833

Reference weight

M+

Now you can place the parts to be counted onto the weighing plate. All quantity pa-

rameters of your goods to be weighed are displayed:

9.3 Automatic reference optimization

If it was impossible to determine a reference due to instable goods to be weighed or

an insufficient reference weight, the [W ] display will appear in the reference weight

window during reference calculation.

Overlay W indicates:

Placed number of pieces insufficient for reference calculation

CXB models < 40 d

CXP models < 20 d

Placed reference weight insufficient for reference calculation

CXB models < 4/5 d

CXP models < 1/5 d

Add additional parts until the [W ] display disappears.

An audio signal indicates that reference optimization has been carried out.

At every reference optimisation, the reference weight is calculated anew. As the addi-

tional pieces increase the base for the calculation, the reference also becomes more

exact.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

Sin comentarios

Kern-sohn CXP Version 1.6 Manual de usuario Pagina 27