Kern-sohn MLS 50-3C Manual de usuario descargar pdf (Pagina 62)

62 MLS_C-BA-e-1330

7. How to enter a target weight for a sample

The user can enter a target weight stating a tolerance range for the sample.

This entry facilitates the application of identical sample sizes for each drying

process.

Press the arrow keys ( ), to select “Sample“

Press the  -key for the current setting to appear

Press the -key; the current menu item blinks

Press the arrow keys ( ), to select among the

settings below

• None

Function disabled

• Optional

A message appears giving information

whether the sample weight is within the

entered tolerance limits. The drying process

will be started even if the sample weight is

beyond the defined tolerance limits.

• Obligatory

A message appears giving information

whether the sample weight is within the

entered tolerance limits. The drying process

will only be started if the sample weight does

not exceed the defined tolerance limits.

Confirm settings by pressing the PRINT key.

After selecting optional or obligatory enter the target

weight and tolerance limits.

Press the arrow keys ( ), to select the parameters

Press the  -button and the current setting will flash

Press the arrow keys ( ), to carry out the desired

setting

Confirm entry by pressing the PRINT-key and enter

additional parameters as follows.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 82 83

Sin comentarios

Kern-sohn MLS 50-3C Manual de usuario Pagina 62